Aluminum titanate Riser Tube for low pressure casting
Riser tube is an important part of aluminum low pressure die casting machine .In die casting process ,molten aluminum(700-900)is sent from riser tube to mould cavity evert 3-5 minutes .
Compared with traditional steel riser tube , aluminum titante ceramic becomes the optimum material for riser tubes due to its lower thermal expansion , good thermal shock resistance and non-stick aluminum .
Aluminum titanate Riser tube made by Zibo Taisheng is used for conveying molten aluminum in foundry industry .Riser tube in Taisheng can be made by both aluminum titanate and silicon nitride material .These two materials are both have excellent thermal shock resistance and corrision resistance , and can not be wetted by liquid molten aluminum .
Item
|
Standard
|
Unit
|
Density
|
3.2
|
g/cm3
|
Porosity
|
3.8
|
%
|
Bending strength
|
50
|
MPa
|
Thermal-expansion
coefficient
|
1.17
|
10-6/℃
|
Heat-shock resistance
|
Good
|
|
Application:
Conveying of molten aluminum
Advantage:
1,Excellent thermal shock resistance
2,Low wetting by aluminum and non-ferrous metal
3,Excellent wear resistance and corrision resistance
4,Increasing productivity and reduce cost.
Other biz of this company
- Message:
-
Message Must Input!
Your Contact Information: