The A component is dope with various colors, The B component is transparent liquid.
Fast curing speed. At 25 °C, within 1-3 hour, the surface cures, and 2 days later, it reaches its maximum bonding strength.
Being durable and resistant to ultraviolet light, once the bond has formed.
Being heat-resistant, it adapts to a wide range of temperature and bonds well under high temperature.
Mix the two components in a certain proportion, apply it to the surface of the substrates directly, which makes it so convenient to use.
You.ll see long term durability and resistance to moisture, chemicals, oils, and temperature extremes.
Non-toxic after solidification, though it is a little smelly.
Shelf life is one and half a year.
The main technical parameters are as follows:
Temp. resistance scope：-52 °C－+225 °C
at room temperature: Tensile strength≥35MPa; Shearing strength≥28MPa peeling strength: 29KN/M
at 150°C tensile strength 3-5 Mpa volume resistance: (25°C) 1×1015Ω.cm
surface resistance 2.5×1015Ω.cm
voltage resistance 20-25kV/mm hardness shore D 85 water absorbing capacity 24h＜0.1% Tg:200°C
|