aluminum thick plate 6082 T6

We offer aluminium mould plate 6082 T6 at good price and nice quality. Alloy: 6082 Temper: T6, T651 Thickness: 2-90mm Width: 10-1525mm Dimension: As per customers' requirements The alloy 6082 has very good welding characteristics and may be welded by all of the common welding techniques. Gas tungsten arc welding is generally used for thin sections and gas metal arc welding is used for heavier sections. Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, and in pipelines. Principal Design Features Probably the most commonly available, heat treatable aluminum alloy. Applications Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, and in pipelines. Machinability Machinability in the harder T 4 and T6 tempers is good. It is notably less easy to machine in the annealed temper Forming Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods. Welding The alloy has very good welding characteristics and may be welded by all of the common welding techniques. Gas tungsten arc welding is generally used for thin sections (less than 0.032") and gas metal arc welding is used for heavier sections. Use alloy 4043 filler wire for best results, although a decrease in T 6 properties will result. Heat Treatment Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling.